Download the Click2Enter I
manual in PDF format.

• Externally visible power LED & activation LED
• Time/day/agency memory recall
• User-selected PIN for security of programmed frequencies
• Factory override PIN, via software
• Separate device available to perform external test/ operation of Click2Enter-I
• Five year manganese dioxide lithium battery memory backup features
• CTCSS, PL/DPL private line (PL) programming capability
• Auto detect and load of sub-audible private line codes
• Able to receive talk around carriers of trunk line radio system transmissions
• Able to receive radio transmissions to include 800 MHz bands
• 20 channel capacity
• Programmable via RS-232 interface
• Two radio transmission "clicks" for activation
• Able to capture and exhibit activation data log, via software
• Relay or dry contact ready
• Extra set of relay contacts to activate a multitude of devices
• Latch open and close features. Programmable for variables 0 to 60 minute reset delay on each channel (0 = pulse ON only)
• Field programmable using a Windows CE PDA
• Unit enclosed in a NEMA/EEMAC Type 4 fiberglass box, with security screws supplied
• Ability to handle high power mobile transmitters and lower power hand held portable transmitters
• Compatible with most analog or digital radio transmitters, using private line sub-audible transmissions (digital set to "clear mode")
• Proprietary programming software built into each unit
• Computer software programmable using standard terminal emulation software
• Variable activation range via programming
• Retrofit kit available for extreme temperature range installations (hot & cold)
• Mutual aid compatible
• Ability to adapt and use 12 VDC to 24 VDC. Can also use 12 VAC to 24 VAC, however we recommend a plug-in style DC output transformer be used.
• Lightning surge protected (current/surge limiting circuit) rated at 140 VAC and 175 VDC. Surge current rated at 600 amps
• Reflective logo for night identification